Single tube tower belongs to the field of tube tower technology. The following will provide a detailed introduction from its structure, characteristics, applications, and other aspects:

Basic structure

①　Main structure: A single tube tower is a self-supporting high-rise steel structure with a single large-diameter conical steel pipe as the main structure. The cross-section of the tower body is generally circular or regular polygon.

②　Connection method: The tower sections are connected as a whole by plug-in or flange connection, and are connected by high-strength bolts through connectors for easy and fast installation.

③　Ancillary facilities: A lower gate hole is opened on the bottom pipe wall of the tower, and an upper gate hole is opened on the pipe wall where the work platform is located. The antenna bracket is fixed to the fence of the work platform. The tower is also equipped with a climbing ladder consisting of a main pole and a crossbar, which facilitates personnel access for maintenance.

Main features 

①　Appearance advantage: The appearance is simple and atmospheric, with a straight and symmetrical body shape. Compared with other tower types, it is more beautiful and can better integrate with the urban landscape. It is suitable for cities, scenic spots, commercial areas and other places with high appearance requirements.

②　Small land occupation: The land occupation area is usually 9-18 square meters, and the foundation is mostly made of square or circular plates. Compared with traditional angle steel towers, it can effectively reduce the land acquisition area and lower the construction cost.

③　Convenient construction: Adopting a more reasonable segment design, connected by high-strength bolts, with lifting equipment operation conditions, the installation speed is fast, the basic construction period is 7-10 days, the foundation maintenance is 28 days, and the installation pole is about 1 day.

④　Good performance: The tower body is made of steel structure, with high material strength and the ability to withstand large loads. At the same time, the built-in ladder and wiring method can provide a convenient and safe operating environment for operators, and also prevent the feeder from being exposed to sunlight and rain, extending the service life of the feeder.

Technical Parameter

①　Material: Mainly made of steel and alloy structural steel, such as Q235-Q345, to ensure the strength and stability of the tower body.

②　Specification: The height is generally between 15-50 meters, with common specifications including 25 meters, 30 meters, 35 meters, 40 meters, 45 meters, 50 meters, etc.

③　Steel plate thickness: The thickness of the rod steel plate is generally above 5mm, and the thickness of the flange is above 20mm.

④　Compressive and seismic resistance: The compressive strength is generally between 0.35-0.65Pa, and the seismic resistance level can reach level 8, which can adapt to various complex natural environments.

⑤　Temperature adaptation: The temperature range for use is generally -45 ℃ -+45 ℃, and it can be used normally under different climatic conditions.

⑥　Service life: After anti-corrosion treatment such as hot-dip galvanizing, the service life of a single tube tower can reach 30 years.

Application area

①　In the field of communication: it is one of the commonly used tower types by communication operators such as China Mobile, China Unicom, and China Telecom. It is used to carry wireless transmission communication equipment, support signal transmission, provide support for signal transmission antennas, and expand the service radius of wireless communication systems.

②　In the field of broadcasting and television: it can be used for the transmission of broadcasting and television signals, transmitting them to a wider area to improve signal coverage and quality.

③　Monitoring field: Monitoring equipment can be installed for monitoring urban roads, highways, parks and other places, achieving real-time monitoring and management of specific areas.

Workshop

Single tube tower welding

laser cutting 

Automatic production of angle steel

Hot dip galvanizing workshop